Oil Capacity: | 1.3 Ltrs | 0.29 Gallaons |
Weight: | 3 Kg | 6.6 Lb |
Air Flow Capacity: | 1.5 – 8 m3/min | 53 – 282 cfm |
Hose Connection: | 3/4″ – 1″ |
It is also known as Lubricator and Air Line Lubricator
Showing 1–6 of 33 results
Oil Capacity: | 1.3 Ltrs | 0.29 Gallaons |
Weight: | 3 Kg | 6.6 Lb |
Air Flow Capacity: | 1.5 – 8 m3/min | 53 – 282 cfm |
Hose Connection: | 3/4″ – 1″ |
It is also known as Lubricator and Air Line Lubricator
Size: | 22mm and 25mm Dia |
Length: | 1000mm to 2100mm |
Material: | High Tensile Steel |
Types: | Solid or with flushing hole |
Shank Size: | 25mm and 39.7mm |
Make: | SDC |
Suitable for: | Roof Drilling In Underground Coal Mines |
Weight: | 9 kg / 20 lb |
Length: | 550 mm |
Shank Size: | 22 X 82mm |
Piston Diameter: | 40mm |
Frequency: | 1500BPM |
Air Consumtion: | 1.25 m3 /min or 88 CFM |
Stroke: | 88mm |
Other Names: Pneumatic Chipping Hammer, Air Hammer
Muffler for Noice Reduction and Vibration Reduction is an addon Feature with Model DM 777PHS
Weight: | 10 kg / 22 lb |
Length: | 495 mm |
Shank Size: | 19 X 82mm |
Piston Diameter: | 40mm |
Frequency: | 1320BPM |
Air Consumtion: | 1.25 m3 /min or 44 CFM |
Other Names: Pneumatic Chipping Hammer, Air Hammer
Muffler for Noice Reduction and Vibration Reduction is an addon Feature with Model DM CD 22PHS
Thread Size: | ¼ Inches to 2 Inches |
Working Pressure: | 10 Bar to 16 Bar |
Material: | Zink Plated Cast Iron or Steel Forge |
Seal: | Oil Resistant Rubber Seal |
Types: | Female Thread, Male Thread , Hose Tail, Retaining Rings and Collar with Hose Tail. |
They are also known as Pneumatic Connections, Hose Couplings, Joint Couplings and Hose Pipe Couplings.
Compatible With: | Diamond / Turbine Section Drill Rods. |
Types: | Dry or Wet |
Size: | 36mm and 43mm |
End type: | Tail |
Tip Types: | Coal or Stone |
Make: | SDC |
Other Names – Coal Mining Drill Bit, 43mm Drill Bit, Coal Drill Bit 43mm and Stone Drill Bit 43mm for Coal Mining and SDC Coal Drill Bit.