Showing 1–6 of 15 results
| Weight: | 9 kg / 20 lb |
| Length: | 550 mm |
| Shank Size: | 22 X 82mm |
| Piston Diameter: | 40mm |
| Frequency: | 1500BPM |
| Air Consumtion: | 1.25 m3 /min or 88 CFM |
| Stroke: | 88mm |
Other Names: Pneumatic Chipping Hammer, Air Hammer
Muffler for Noice Reduction and Vibration Reduction is an addon Feature with Model DM 777PHS
| Weight: | 10 kg / 22 lb |
| Length: | 495 mm |
| Shank Size: | 19 X 82mm |
| Piston Diameter: | 40mm |
| Frequency: | 1320BPM |
| Air Consumtion: | 1.25 m3 /min or 44 CFM |
Other Names: Pneumatic Chipping Hammer, Air Hammer
Muffler for Noice Reduction and Vibration Reduction is an addon Feature with Model DM CD 22PHS
| Model: | DMCD 200 | DMCD 400 |
| Capacity NQ BQ Meters: | 200 – 300 | 400 – 600 |
| Rotary Head | ||
| High Speed at Low Torque: | 1000 rpm @ 300Nm | 650 rpm |
| Low Speed at High Torque: | 75 rpm @ 1000Nm | 390 Nm |
| Wire Line Winch | ||
| Wireline Length Capacity: | 300 mtrs | 600 mtrs |
| Line Pull (Bare Drum): | 1200 kg | 4596 kg |
| Line Speed (Bare Drum): | 90 m/min | 75 m/min |
| Main Winch Load Capacity | ||
| Single lIne Capacity (Bare Drum): | 3000 Kg | 1815 kg |
| Speed (Bare Drum): | 45 m/min | 45 m/min |
| Mounting: | Crawler or Truck | |
| Weight: | 12.6 Tons | 13.8 Tons |
| Description | Metric | English |
| Weight: | 2500 KG | 5515 Lbs |
| Feed Motor | 4.0 KW | |
| Pull Up | 1825 Kg | 4023.4 Lbs |
| Pull Down: | 1730 kg | 3814 Lbs |
| Hydraulic Pump Motor: | 5.8KW | 7.77 HP |
| Propel Motor: | 3.8 KW | 5.10 HP |
| Tramming Speed: | 3.5 kmph | 2.2 mph |
| Climbing Ability: | 30° | |
| Track Occilation: | 20° | |
| Ground Clearance: | 240 mm | 9.45 Inches |
| Height: | 1670 mm | 65.75 Inches |
| Weidth: | 1800 mm | 70.89 Inches |
| Length: | 4800 mm | 189 Inches |
| Boom Movement | ||
| Below Center Line: | 30° | 30° |
| Above Center Line: | 45° | 45° |
| Boom Swing (Right): | 90° | 90° |
| Boom Swing (Left): | 75° | 75° |
| Maximum Depth: | 20mtrs | |
| Hole Diameter: | 76-127mm | |
| Air Compressor: | 14 Bar |
| Description | Metric | English |
| Weight: | 4500kg | 9000 lbs |
| Feed Motor | 4.0 KW | |
| Pull Up | 1825 Kg | 4023.4 Lbs |
| Pull Down: | 1730 kg | 3814 Lbs |
| Hydraulic Pump Motor: | 5.8KW | 7.77 HP |
| Propel Motor: | 8.5 KW | 11.4 HP |
| Tramming Speed: | 3.5 kmph | 2.2 mph |
| Climbing Ability: | 40° | |
| Track Occilation: | 20° | |
| Ground Clearance: | 260 mm | |
| Height: | 3250 mm | 128 Inches |
| Weidth: | 2320 mm | 91.3 Inches |
| Length: | 5500 mm | 216.5 Inches |
| Boom Movement | ||
| Below Center Line: | 19° | 19° |
| Above Center Line: | 60° | 60° |
| Boom Swing (Right): | 45° | 45° |
| Boom Swing (Left): | 45° | 45° |
| Maximum Depth: | 70mtrs | |
| Hole Diameter: | 76-127mm | |
| Air Compressor: | 14 Bar |
| Description | Metric | English |
| Weight: | 6400kg | 14109 lbs |
| Pull Up | 2500 kg | 5511 lbs |
| Pull Down: | 2500 kg | 5511 lbs |
| Hydraulic Pump Motor: | Engine | |
| Propel Motor: | 560cc | |
| Tramming Speed: | 3 Kmph | |
| Climbing Ability: | 30° | |
| Track Occilation: | 20° | |
| Ground Clearance: | 265 mm | 10.43 Inches |
| Height: | 3300 mm | 130 Inches |
| Weidth: | 2200 mm | 86.61 Inches |
| Length: | 5580 mm | 220 Inches |
| Boom Movement | ||
| Below Center Line: | 10° | |
| Above Center Line: | 60° | |
| Boom Swing (Right): | 45° | |
| Boom Swing (Left): | 45° | |
| Maximum Depth: | 100 Mtrs | |
| Hole Diameter: | 76 – 127 mm | |
| Air Compressor: | 14 Bar | |
| Power: | 35.8 KW Diesel Engine | |
| Leveling Jacks: | 2 Hydraulic Leveling Jacks | |
| Rotary Head | ||
| Maximum Spindle torque (Parallel): | 150 rpm | |
| Maximum spindle torque (Series): | 160 kg |
